龙船社区 首页 专栏 某小女自习室 查看内容

船上三种标准排放接头

2016-3-15 09:37| 查看: 3373| 评论: 17

据说小女很久没有更新专栏,大大们要怒了。/(ㄒoㄒ)/~~
啥也别说了,赶紧的。
整理了船上的三种标准排放接头,放在一起看看还是挺有感觉的。





一【FSS】国际通岸接头
International Shore Connection

image002.jpg

(中)国际通岸接头法兰的标准尺寸,应符合下表要求:

image003.jpg

国际通岸接头应用钢或其他等效材料制成,并设计成能承受1.0N/mm2工作压力。其一端应为平面法兰,另一端则有永久附连的配合船上消火栓和消防水带的接口。国际通岸接头 应与1只承受1.0N/mm2工作压力的任何材料的垫片及4只长度为50mm、直径为16mm的螺栓4只、直径为16mm的螺帽和8只垫圈一起保存在船上。

(En)Standard dimensions of flanges for the international shore connection shall be in accordance with the following table:

image004.jpg

Table - Standard dimensions for international shore connectionsInternational shore connections shall be of steel or other equivalent material and shall be designed for 1.0 N/mm2 services. The flange shall have a flat face on one side and, on the other side, it shall be permanently attached to a coupling that will fit the ship's hydrant and hose. The connection shall be kept aboard the ship together with a gasket of any material suitable for 1.0 N/mm2  services, together with four bolts of 16 mm diameter and 50 mm in length, four 16 mm nuts, and eight washers.



二【MARPOL】机器处所残油标准排放接头
Standard Discharge Connection for residues from machinery spaces

image005.jpg

中)为了使接收设备的管路能与船上机舱舱底和残油(油泥)舱残余物的排放管路相连结,在这两条管路上均应装有符合下表的标准排放接头:

image006.jpg

(En)To enable pipes of reception facilities to be connected with the ship's discharge pipeline for residues from machinery bilges and from oil residue (sludge) tanks, both lines shall be fitted with a standard discharge connection in accordance with the following table:
Table -Standard dimensions of flanges for discharge connections

image007.jpg



三【MARPOL】生活污水标准排放接头
Standard Discharge Connection for sewage

742155587518498737.jpg

中)为了使接收设备的管路能与船上的排放管路相连结,两条管路均应装有符合下表的标准排放接头:

image008.jpg

En)To enable pipes of reception facilities to be connected with the ship’s discharge pipeline, both lines shall be fitted with a standard discharge connection in accordance with the following table:

image009.jpg

For ships having a moulded depth of 5 metres and less, the inner diameter of the discharge connection may be 38 millimetres.


Seeya~~~



发表评论

最新评论

引用 酷到被起诉 2016-3-15 10:12
对比一下收获很多,谢谢小女,支持支持
引用 舟之轨 2016-3-15 12:17
多谢!收藏了。
引用 苍山夹乱流 2016-3-15 13:01
国际通岸接头是为了船到岸?还是岸到船?或者BOTH?
引用 jcfu 2016-3-15 14:01
苍山夹乱流 发表于 2016-3-15 13:01
国际通岸接头是为了船到岸?还是岸到船?或者BOTH?

那必须是BOTH
引用 jcfu 2016-3-15 14:05
为什么不改进设计成密封性好的快速标准接头呢?一直以来就是拆螺栓把螺栓......
引用 Sammy_Wang 2016-3-15 15:41
弱弱的问句,螺栓,不怕掉了么?
引用 HCHCH747521 2016-3-25 13:23
污水排放法兰中文的法兰厚度错了:16mm
引用 山高人为峰 2016-3-25 15:45
来留个脚印,这些东西对船上三副很有帮助
引用 jisaide 2016-4-3 11:08
是秦皇岛的小女吗?嘿嘿
引用 singa_wh 2017-1-21 12:39
谢谢分享,学习!
引用 xjf 2017-1-21 14:05
干货。谢谢分享
引用 上海船人 2017-5-28 11:01

多谢!收藏了。
引用 zhangjingtao 2017-5-30 11:35
生活污水排岸接头法兰面看你的图有凸台。这种可以么?公约为平面。F—F
引用 jfshanyue 2017-9-8 17:29
dddddddddddzan
引用 英雄萨姆 2021-2-20 09:07
个人认为只有后两个才可以叫做排放接头,是船到岸。第一个是岸到船
引用 留得残荷听雨声 2021-2-20 17:26
     通岸接头(闷盖也是标准件)及污水排岸都少闷盖。

查看全部评论(17)

热门文章

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-4-26 11:51

Powered by Imarine

Copyright © 2006, 龙船社区

返回顶部