查看: 6292|回复: 16
收起左侧

[舾装技术] 窗与舷窗布置区别

[复制链接]
发表于 2013-10-9 22:34 | 显示全部楼层 |阅读模式 来自: 中国福建福州
大家好,请问窗跟舷窗在布置上有什么区别吗?什么情况下用窗,什么情况下用舷窗?另外在有些船上还要求窗户还要配风暴盖,这是为什么。舷窗可以布置在干舷甲板以上多高,谢谢?
回复

使用道具 举报

龙船学院
发表于 2013-10-10 07:52 | 显示全部楼层 来自: 中国江苏南通
帮顶,等知道的
回复 支持 反对

使用道具 举报

发表于 2013-10-10 08:08 | 显示全部楼层 来自: 中国福建宁德
有线型的地方用舷窗,风暴盖规范有要求!估计是这样???
回复 支持 反对

使用道具 举报

发表于 2013-10-10 08:17 | 显示全部楼层 来自: 中国江苏南通
风暴盖一般主甲板和艇甲板上用的吧。上面几层很少见。主甲板上一定要用舷窗,主甲板以上有的可以用普通窗。
回复 支持 反对

使用道具 举报

发表于 2013-10-11 20:05 | 显示全部楼层 来自: 中国上海
规范里面有,找找看
回复 支持 反对

使用道具 举报

发表于 2014-1-4 11:41 | 显示全部楼层 来自: 中国浙江舟山
不知道,等学习。。。。
回复 支持 反对

使用道具 举报

发表于 2014-1-4 11:50 | 显示全部楼层 来自: 中国江苏南京
定义不一样:
舷窗为面积不超过0.16平方米的圆形或椭圆形开口。
窗为一般呈方形开口,其每个角隅有一个与方窗过渡的圆弧,以及面积超过0.16平方米的圆形或椭圆形开口
具体位置查LOAD LINE
回复 支持 反对

使用道具 举报

发表于 2014-8-27 14:13 | 显示全部楼层 来自: 中国辽宁
7楼正解,我们的平台在水密分割线下侧的窗,DNV要求用舷窗,而且要加风暴盖,原因是海浪的拍击力很大哦
回复 支持 反对

使用道具 举报

发表于 2014-9-28 13:48 | 显示全部楼层 来自: 中国广东深圳
学习一下!
回复 支持 反对

使用道具 举报

发表于 2014-9-30 11:52 | 显示全部楼层 来自: 中国广东东莞
7 楼说的好
回复 支持 反对

使用道具 举报

发表于 2014-9-30 14:27 | 显示全部楼层 来自: 中国江苏南通
简单载重线公约一看就明白 去查吧
回复 支持 反对

使用道具 举报

发表于 2014-10-14 16:52 | 显示全部楼层 来自: 中国广东江门
ABS2013 part 3-2-17-9.3规定第2-4层以上的窗都要带风暴盖,风暴盖装在外面,除非装不了。
回复 支持 反对

使用道具 举报

发表于 2014-10-14 16:54 | 显示全部楼层 来自: 中国广东江门
9 Windows
9.1 Construction (1 July 2012)
Windows are defined as being rectangular openings, or round or oval openings, with an area exceeding 0.16 m2.
Windows may only be fitted in the following locations:
i) In front bulkheads of deckhouse and superstructures, in the second tier and higher above the freeboard deck. In the first tier of front bulkheads above the weather deck portlights are acceptable.
ii) In the after end bulkheads and sides of deckhouses and superstructures in the second tier and higher tiers.
iii) In first tier deckhouses that are not considered buoyant in the stability calculations and that do not protect openings leading below.
Portlights are required in locations not specified above.
Window frames are to be metal or other approved material and secured to the adjacent structure. Window cutouts are to have a minimum of 6.5 mm (0.25 in.) radius at all corners and the glazing is to be set into the frames in an approved, flexible seawater and sunlight resistant packing or compound. Special attention is to be paid to the windows installed in angled deckhouse fronts.
回复 支持 反对

使用道具 举报

发表于 2020-7-31 21:47 | 显示全部楼层 来自: 中国浙江台州
天天造船 发表于 2014-1-4 11:50
定义不一样:
舷窗为面积不超过0.16平方米的圆形或椭圆形开口。
窗为一般呈方形开口,其每个角隅有一个与 ...

窗和舷窗的区别界限在0.16m2,窗是方的,舷窗是圆的
回复 支持 反对

使用道具 举报

发表于 2020-8-26 15:37 | 显示全部楼层 来自: 中国上海
窗是方的,舷窗是圆的
回复 支持 反对

使用道具 举报

发表于 2020-9-28 12:52 | 显示全部楼层 来自: 中国江苏扬州
舷窗是窗的一种,舷窗装的位置跟载重线有关
回复 支持 反对

使用道具 举报

发表于 2020-9-29 14:36 | 显示全部楼层 来自: 中国上海
去找本载重线公约1988修正案看看,里面有一条专门讲窗与舷窗。
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-3-29 07:50

Powered by Imarine

Copyright © 2006, 龙船社区

快速回复 返回顶部 返回列表