查看: 1279|回复: 9
收起左侧

[基础知识] 不上图了,太多,流水问题供阅读

[复制链接]
头像被屏蔽
发表于 2021-5-12 13:07 | 显示全部楼层 |阅读模式 来自: 中国浙江
1.After mast whistle air pipe leakage. 2.battery room topside A60 damaged. To be renewed. 3.Radio locker air vent lack of anti-fire mesh. To be added accordingly.4.Bridge wing deck plate too weak. And could feel sound when walk on it. Like drum sound. 5.Port side sanitary ventilation inspection cover. Butterfly bolts broken. To be renewed 6.All emergency light for LSA, to de painted in red color. 7.Rescue boat davit to be repainted due to rusty 8.Lack of name plate for No1 engine room supply fan damper closing device. 9.Bridge wing smoke and light line to be renewed. Aged.10.Emergency generator room to be throughly cleaned. Dirty11.Emergency generator room door, top side lock handle position to be redjusted. Could not close at present position.  12.Some water tap around accommodation and on deck not installed. 13.Engine room funnel fire damper open/closing device to fixed. 14.20 persons position to be marked on scene of muster station of free fall life boat. 15.Air blow valve for No7 cargo hold of CO2 line not installed properly. Pls check and rectify. 16.Fresh water filling flange locking hook to be refit with same size. And paint in  blue color. 17.All windlass and mooring winch brake supporting bolt gap to be adjusted to 2-3mm. 18.Steel mesh to be added to the gas station locker. Due to we could touch the valve from outside even the door was locked. 19.Anchorage chain compressor should painted in red paint 20.Bunker manifold for fuel oil and MGO should painted with black and brown color on flange.21.Keep clear from emergency escape trunk to be karked on the door. 22.Yellow color to be applied on all cargo hold cleat bolts. 23.All twisbcle to be applied with grease and locked properly. 24All stoppers to tb marked in yellow paint. 1.桅杆后吹口哨后风管泄漏。2.A60上方的电池室损坏。需更新。3.无线电储物柜空气通风口缺乏防火网。4.桥面板太弱。走路时能感觉到声音。就像鼓声。5.港口侧卫生通风检查罩。蝴蝶螺栓坏了。所有用于LSA的应急灯,涂成红色。7.救生艇吊艇架因生锈而须重涂8.1号机房供油风扇阻尼器关闭装置的名称板。9.桥梁机翼烟光线更新。10.应急发电机室要彻底清理。应急发电机机房门,顶部侧锁把手位置需要调整。无法在目前的位置关闭。12.宿舍周围及甲板上没有安装水龙头。13.发动机室漏斗式防火阻尼器开启/关闭装置至固定。14.20人在自由落水救生艇集合站现场标记的位置。15.二氧化碳管线7号货舱的吹气阀安装不当。请检查并纠正。16.淡水填充法兰锁紧钩尺寸相同。还有蓝色的油漆。17.所有绞车和系泊绞车的支撑螺栓间隙都要调整到2-3毫米。18.加在加油站储物柜上的钢网。因为我们可以从外面触摸阀门,甚至门锁上了。19.锚定链式压缩机应涂上红色油漆20.燃料油油库歧管和氧化镁应在法兰上涂上黑色和棕色.21.保持安全,远离紧急逃生后备箱,放在门上。22.黄色适用于所有货舱的锁紧螺栓。23.每一圈都要涂上油脂,并适当地锁上。24所有用黄色油漆标记的结核病的阻隔物。
回复

使用道具 举报

龙船学院
发表于 2021-5-12 13:26 | 显示全部楼层 来自: 中国浙江舟山
这是什么翻译软件?
回复 支持 反对

使用道具 举报

头像被屏蔽
 楼主| 发表于 2021-5-12 13:37 来自手机 | 显示全部楼层 来自: 中国浙江
xjf 发表于 2021-05-12 13:26
这是什么翻译软件?

微信翻译的,别看翻译,看原文!
回复 支持 反对

使用道具 举报

发表于 2021-5-12 15:43 | 显示全部楼层 来自: 中国上海
保存下来,仔细研读认真学习,谢谢楼主
回复 支持 反对

使用道具 举报

头像被屏蔽
 楼主| 发表于 2021-5-12 16:38 来自手机 | 显示全部楼层 来自: 中国浙江
labilaoxin 发表于 2021-05-12 15:43
保存下来,仔细研读认真学习,谢谢楼主

客气了!!!!你是老师傅还用学习吗?
回复 支持 反对

使用道具 举报

发表于 2021-5-12 16:43 | 显示全部楼层 来自: 中国上海
czl船舶一生 发表于 2021-5-12 16:38
客气了!!!!你是老师傅还用学习吗?

我就是一个小钳工,拧个螺丝,抡个大锤。不学习能行吗
回复 支持 反对

使用道具 举报

发表于 2021-5-12 16:53 | 显示全部楼层 来自: 中国江苏南通
labilaoxin 发表于 2021-5-12 16:43
我就是一个小钳工,拧个螺丝,抡个大锤。不学习能行吗

过分谦虚等于虚伪,看看奖章那么多就知道
回复 支持 1 反对 0

使用道具 举报

发表于 2021-5-13 08:23 | 显示全部楼层 来自: 中国山东青岛
这是船东提出的问题吗
回复 支持 反对

使用道具 举报

头像被屏蔽
 楼主| 发表于 2021-5-13 08:26 来自手机 | 显示全部楼层 来自: 中国浙江
牙牙1974 发表于 2021-05-13 08:23
这是船东提出的问题吗

是的啊!!!!!!!
回复 支持 反对

使用道具 举报

发表于 2021-5-13 08:33 来自手机 | 显示全部楼层 来自: 中国江苏南通
这船东提的问题还不少?
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-4-19 11:37

Powered by Imarine

Copyright © 2006, 龙船社区

快速回复 返回顶部 返回列表