12
返回列表 发新帖
楼主: fzhrxy
收起左侧

[船体] 抛锚后,锚的抓力是靠chain stopper还是windlass承受?

  [复制链接]
发表于 2011-10-31 20:10 | 显示全部楼层 来自: 中国山东济南
chain stopper
回复 支持 反对

使用道具 举报

龙船学院
发表于 2011-10-31 22:41 | 显示全部楼层 来自: 中国北京
Chain compressor
回复 支持 反对

使用道具 举报

发表于 2011-11-1 09:38 | 显示全部楼层 来自: 中国山东烟台
五楼的回答很好啊。。。
回复 支持 反对

使用道具 举报

发表于 2011-11-1 09:44 | 显示全部楼层 来自: 中国辽宁大连
学习了     一直误解了哈
回复 支持 反对

使用道具 举报

发表于 2019-9-17 21:04 | 显示全部楼层 来自: 中国浙江湖州
以前抛锚时,抛好后,锚链和stopper之间都会留有间隙,也就是说由刹车来承担负荷。
但是根据VIQ 9.20之描述,似乎并非如此。欢迎大家提出高见,谢谢!
Anchoring equipment:
9.20 Are windlasses, anchors, locking bars and cables in good order and operating effectively?
Note: The condition of the locking bars should be checked to ascertain that they function correctly by locking the chain when the vessel is at anchor to prevent the brake having to take the full load of the cable.
回复 支持 反对

使用道具 举报

发表于 2019-9-21 07:50 | 显示全部楼层 来自: 中国江苏苏州
五楼分析的很到位
回复 支持 反对

使用道具 举报

发表于 2019-10-11 13:42 | 显示全部楼层 来自: 中国江苏南通
16楼说的形象,完全同意。
回复 支持 反对

使用道具 举报

发表于 2023-4-4 14:59 | 显示全部楼层 来自: 中国山东青岛
止链器一合上,它就是主力
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-3-29 16:07

Powered by Imarine

Copyright © 2006, 龙船社区

快速回复 返回顶部 返回列表