查看: 2813|回复: 15
收起左侧

LPG 船

[复制链接]
发表于 2017-7-25 16:53 | 显示全部楼层 |阅读模式 来自: 中国上海
各位大神,图中的这个专业术语叫什么?谢谢!
Water Spray.jpg
回复

使用道具 举报

龙船学院
发表于 2017-7-25 17:00 | 显示全部楼层 来自: 中国上海
水雾喷淋,IGC code里要求的
回复 支持 反对

使用道具 举报

 楼主| 发表于 2017-7-25 17:05 | 显示全部楼层 来自: 中国上海
shjsh169 发表于 2017-7-25 17:00
水雾喷淋,IGC code里要求的

图中红色方框内是什么?冷却塔吗?
回复 支持 反对

使用道具 举报

发表于 2017-7-25 17:07 | 显示全部楼层 来自: 中国江苏无锡
楼主,你这个船是36K LEG 吧?
回复 支持 反对

使用道具 举报

发表于 2017-7-25 17:07 | 显示全部楼层 来自: 中国上海
nacksyjt 发表于 2017-7-25 17:05
图中红色方框内是什么?冷却塔吗?

目测是集中透气塔,原理跟油化船差不多,只是这个要求更高
回复 支持 反对

使用道具 举报

发表于 2017-7-26 06:25 | 显示全部楼层 来自: 中国江苏南京
液货区域水雾喷淋
回复 支持 反对

使用道具 举报

发表于 2017-7-26 08:11 | 显示全部楼层 来自: 中国江苏南通
水喷淋,大哥,你这借用我的图片不跟作者打招呼的?
回复 支持 反对

使用道具 举报

发表于 2017-7-26 08:12 | 显示全部楼层 来自: 中国江苏南通
补充说明,你借用的我这张图上的不是LPG,是LEG
回复 支持 1 反对 0

使用道具 举报

发表于 2017-7-26 08:40 来自手机 | 显示全部楼层 来自: 中国
shjsh169 发表于 2017-7-25 17:07
目测是集中透气塔,原理跟油化船差不多,只是这个要求更高

你指的是,啥方面要求高一些?安装?原件本身?还是啥?
回复 支持 反对

使用道具 举报

发表于 2017-7-26 08:44 来自手机 | 显示全部楼层 来自: 中国
桐枫祭忆 发表于 2017-7-26 08:12
补充说明,你借用的我这张图上的不是LPG,是LEG

乙烯船,只用于装运乙烯吗?不能装液化石油气吗?
回复 支持 反对

使用道具 举报

发表于 2017-7-26 08:57 | 显示全部楼层 来自: 中国江苏南通
江海直达 发表于 2017-7-26 08:44
乙烯船,只用于装运乙烯吗?不能装液化石油气吗?

原则上LNG船可以装LNG、LEG和LPG,LEG船可以装LEG和LPG,LPG船只能装LPG,这是理想状态,回答完毕

评分

参与人数 1金币 +6 收起 理由
斯胤 + 6 技术指点,共同进步

查看全部评分

回复 支持 反对

使用道具 举报

发表于 2017-7-26 09:19 | 显示全部楼层 来自: 中国上海
本帖最后由 江海直达 于 2017-7-26 09:20 编辑

IGC CODE:

8.2.9. Each pressure relief valve installed on a cargo tank should be connected to a venting system which should be so constructed that the discharge of gas will be unimpeded and directed vertically upwards at the exit and so arranged as to minimize the possibility of water or snow entering the vent system. The height of vent exits should not be less than B/3 or 6 m, whichever is the greater, above the weather deck and 6 m above the working area, the fore and aft gangway, deck storage tanks and cargo liquid lines.
8.2.10. Cargo tank pressure relief valve vent exits should be arranged at a distance at least equal to B or 25 m, whichever is less, from the nearest air intake or opening to accommodation spaces, service spaces and co***ol stations, or other gas-safe spaces. For ships less than 90 m in length, smaller distances may be permitted by the Administration. All other vent exits connected to the cargo containment system should be arranged at a distance of at least 10 m from the nearest air intake or opening to accommodation spaces, service spaces and co***ol stations, or other gas-safe spaces.

回复 支持 反对

使用道具 举报

发表于 2017-8-1 15:19 | 显示全部楼层 来自: 中国甘肃武威
这是SOE的36KLEG,液货区域甲板水喷淋
回复 支持 反对

使用道具 举报

发表于 2017-8-5 13:43 | 显示全部楼层 来自: 中国辽宁
VENT MAST用于货舱透气和管路安全阀泄放
回复 支持 反对

使用道具 举报

发表于 2017-8-9 11:18 | 显示全部楼层 来自: 中国上海
水雾喷淋系统,凡是油化品船都会有这个系统的,属于消防范畴!
回复 支持 反对

使用道具 举报

发表于 2017-8-13 11:00 | 显示全部楼层 来自: 中国上海
方框里的是液货舱透气桅(VENT MAST), 液货舱安全阀的出口会连接到透气桅上。IGC CODE对透气桅有详细要求。
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-4-19 15:58

Powered by Imarine

Copyright © 2006, 龙船社区

快速回复 返回顶部 返回列表