求助

打铁人

在component里面定义JIS 标准管子时会提示“please give value of (DN),or(DY)or both(DH) and pressure ”定义的管子无法保存使用
（如DN 150 外径165.2 壁厚11的管子）
请哪位大侠帮帮忙，谢谢

NT-COSCO

压力等级呢

更多的思考

把下面的东西导入就可以看到了。
========================================================
COMPONENT, 'JIS-65-SGP','xxx',7101
  ;

GENERAL
   /KIND_OF_COMP = 'P'
   /MAT_CODE = 1
   /WEIGHT = 4.110000E+001
   /STANDARD = (  1, 'STD1', 'JIS' )
   /STANDARD = (  1, 'STD_ID' , 'G3452' )
   /TYPE = ( 1, 'WELD' )
   /SIZE = ( 1, '65' )
   /MAT_QUALITY = ( 1, 'SGPE' )
   /AQUISITION = ( 1, 'L' )
   /DESCR = ( 1, 'DN65-SGPE' )
  ;  

PIPE_PROPERTY
   /TREATMENT = ( 'JOINT', 11 )
   /EXTRUSION = 2
   /BENDING_CODE = 1
  ;  

PIPE_CONNECTION
,1
   /CONNECTION_VECTOR = ( 1,-1.000000E+000 )
   /CONNECTION_VECTOR = ( 2,0.000000E+000 )
   /CONNECTION_VECTOR = ( 3,0.000000E+000 )
   /DIAMETER = 7.630000E+001
   /LENGTH_TO_NODE_POINT = 2.750000E+003
   /NOMINAL_DIAMETER = 65
   /TOTAL_LENGTH = 5.500000E+003
   /WALL_THICKNESS = 4.200000E+000
  ;  

PIPE_CONNECTION
,2
   /CONNECTION_VECTOR = ( 1,1.000000E+000 )
   /CONNECTION_VECTOR = ( 2,0.000000E+000 )
   /CONNECTION_VECTOR = ( 3,0.000000E+000 )
  ;  

SYMBOL
,1
   /FONT_NUMBER = 0
   /SCALE_FACTOR = 1.000000E+000
   /SYMBOL_NUMBER = 7012
   /USAGE_CODE = 4
   /PARAMETERS = ( 1,7.630000E+001 )
   /PARAMETERS = ( 2,7.630000E+001 )
  ;  

EXTENSION
   /COG = (  0.000000E+000,  0.000000E+000,  0.000000E+000 )
  ;  

USER_DEFINED
   /USER_DEFINED_NINT = 10
   /USER_DEFINED_NREA = 10
   /USER_DEFINED_NSTR = 12
   /USER_DEFINED_STR = (1,'24XXXXC43')
   /USER_DEFINED_STR = (2,'36XXXXC43')
   /USER_DEFINED_STR = (3,'53XXXXC43')
   /USER_DEFINED_STR = (4,'64XXXXC43')
   /USER_DEFINED_STR = (5,'74XXXXC43')
  ;

[ 本帖最后由 更多的思考 于 2009-1-8 20:41 编辑 ]

syoregnew

你好大胆，怎么敢把这段代码也给贴出来，源头都要给人看出来了，快把它改了