查看: 5890|回复: 15
收起左侧

看看这个新鲜玩艺,它是舵还是浆?还是浆+舵?

[复制链接]
发表于 2008-7-23 16:57 | 显示全部楼层 |阅读模式 来自: 日本
看看这个新鲜玩艺,它是舵还是浆?还是浆+舵? http://www.voithturbo.com/vt_en_pua_marine_vspropeller.htm Voith Schneider Propellers Over 80 years ago this ship's propulsion system, the only one of its kind in the world was developed by Voith from an idea by the Austrian engineer Ernst Schneider. It allows thrust of any magnitude to be generated in any direction quickly, precisely and in a continuously variable manner. It combines propulsion and steering in a single unit. This solution is as convincing as it is straightforward: on the Voith Schneider Propeller, a rotor casing which ends flush with the ship's bottom is fitted with a number of axially parallel blades and rotates about a vertical axis. To generate thrust, each of the propeller blades performs an oscillating motion about its own axis. This is superimposed on the uniform rotary motion. Blade excursion determines the amount of thrust, while the phase angle of between 0° and 360° determines its direction. As a result, the same amount of thrust can be generated in any direction, making this the ideal variable-pitch propeller. Both variables - the magnitude and the direction of thrust - are controlled by a mechanical kinematic transmission.
snap.jpg
回复

使用道具 举报

龙船学院
发表于 2008-7-23 17:55 | 显示全部楼层 来自: 中国辽宁大连

回复 1楼 的帖子

这是什么螺旋桨啊?船用的?没见过
回复 支持 反对

使用道具 举报

发表于 2008-7-23 17:58 | 显示全部楼层 来自: 中国山东威海
福伊特推进装置,没啥。相比老式螺旋桨它的吃水相比要深些。总的感觉还可以
回复 支持 反对

使用道具 举报

发表于 2008-7-23 18:44 | 显示全部楼层 来自: 新加坡
没见过 学习了
回复 支持 反对

使用道具 举报

发表于 2008-7-23 20:55 | 显示全部楼层 来自: 中国山东烟台
应该是直叶推进器,这种推进器能产生各个方向的推力,,操纵性能比较好,并且在船舶倒退时也不用主机倒转。推进效率也较高,在汹涛海况下更佳!缺点是结构复杂,造价昂贵,叶片保护性差易损坏,这类推进器在港口作业船等对操纵性有特殊要求的的船上利用。
回复 支持 反对

使用道具 举报

发表于 2008-7-24 09:02 | 显示全部楼层 来自: 中国浙江舟山
这是平旋螺旋桨,一般是都是大型功率拖轮用的,一个船是两个为一组,靠两个桨的相互做用力来改变船方向,这种桨可以原地转向,只不过航速低,
回复 支持 反对

使用道具 举报

发表于 2008-7-24 09:07 | 显示全部楼层 来自: 中国辽宁大连
学习
回复 支持 反对

使用道具 举报

发表于 2008-7-24 16:05 | 显示全部楼层 来自: 中国上海
学习了,高级的东西
回复 支持 反对

使用道具 举报

发表于 2008-7-25 02:38 | 显示全部楼层 来自: 中国上海
原帖由 渤海银珠 于 2008-7-23 17:58 发表
福伊特推进装置,没啥。相比老式螺旋桨它的吃水相比要深些。总的感觉还可以
工作原理是什么
回复 支持 反对

使用道具 举报

发表于 2008-7-25 07:13 | 显示全部楼层 来自: 中国浙江温州
谁能放一个安装到船上的图片上来呢,图纸也可以啊!~
回复 支持 反对

使用道具 举报

发表于 2008-7-25 10:48 | 显示全部楼层 来自: 中国辽宁大连
工作原理是啥?
回复 支持 反对

使用道具 举报

发表于 2008-7-25 10:51 | 显示全部楼层 来自: 中国浙江温州
现在新玩意真多啊
回复 支持 反对

使用道具 举报

发表于 2008-7-31 23:24 | 显示全部楼层 来自: 中国浙江舟山
长见识了
回复 支持 反对

使用道具 举报

发表于 2008-8-15 16:40 | 显示全部楼层 来自: 中国江苏南通
和 阻力与推进 教材上的直叶很想啊 不知道是不是
回复 支持 反对

使用道具 举报

发表于 2008-8-15 19:06 | 显示全部楼层 来自: 中国江苏南通
开眼界了,嘿嘿!
回复 支持 反对

使用道具 举报

发表于 2008-8-25 09:52 | 显示全部楼层 来自: 中国江苏南通
先进技术,拿来用
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-4-30 00:08

Powered by Imarine

Copyright © 2006, 龙船社区

快速回复 返回顶部 返回列表